access fritz repeater 310
I have a fritz repeater 310 and I would like to get access to it. But I'm denied to that and would like to know how to do that?
Wšě wotmołwy (8)
For setup, plug the FRITZ! Repeater into a power outlet near the FRITZ!Box. Wait about 1 minute until the FRITZ! Briefly push the WPS button on the FRITZ! Within 2 minutes: Push and hold down the Connect button on the FRITZ! The FRITZ!
To change for exampel languages I need get into the box and firefox denies me to do that. So what do I need to do and know to setup firefox to do that not dennie me do it. What to change in the seting in firefox.
Do you have a VPN?
No not active
Maybe contact the manufacture for support of their hardware and how to access it?
the problem are that the app "Mozilla Firefox" denies me access to the box Fritz!Wlan repeater 310 box. The adress to it is <http://fritz.repeater>. respond from firefox are "no secure address " I have the box installed and working but I would like to look inside!
Check your network connection - Make sure that your device is connected to the same network as your Fritz Repeater 310. If you are not connected to the same network, you will not be able to access the repeater.
Check the IP address - Make sure that you are using the correct IP address to access the Fritz Repeater 310. The default IP address for the Fritz Repeater 310 is "192.168.178.2". You can enter this address into your web browser to access the repeater's login page.
Check your login credentials - If you are prompted for a username and password when you try to access the Fritz Repeater 310, make sure that you are using the correct login credentials. The default username and password for the Fritz Repeater 310 are "admin" and "admin", respectively. If you have changed the login credentials, use the new credentials to log in.
Reset the Fritz Repeater 310 - If you are still unable to access the repeater, you can try resetting it to its default settings. To do this, press and hold the "WPS" button on the repeater for at least 10 seconds until the power LED starts flashing. The repeater will then restart and return to its factory default settings.
If none of these solutions work, you may want to consult the user manual for your Fritz Repeater 310 or contact the manufacturer's customer support for further assistance.
Does Firefox try to force a secure connection, but this device only works with HTTP ? Are you using the IP of does it support a host name ? Can you ad a HTTPS-Only Mode 'off' exception ?